Australis Natural Decking Oil
Product Code: 981-900
Australis Natural Decking Oil is a semi transparent solvent based finish. Formulated to extend the life of your decking, fences and pergolas. Australis Natural Decking Oil penetrates, protects exterior rough sawn and dressed timber, delivering a long lasting beautiful result.
Areas of Use
Suitable for use on interior and exterior timber.
Ensure the timber surface is dry and free from oil, grease, dirt and wax.
Rough Sawn Timber
Remove any large splinters and edge roughness, repair any cracks or gaps with a suitable coloured filler and smooth off.
Remove any exudations with mineral turpentine, seal any knots with knoting varnish. Repair gaps and cracks with a suitably coloured filler. Sand smooth and dust off.
Stir well using a broad flat panel in a scooping motion. May be applied by brush, roller, airless or conventional spray.
- Touch dry: 8 hours
- Recoat: 24 hours
- Normal foot traffic: 24 hour
Approximately 6-8 square metres per litre. This will vary depending on the application technique and the surface profile of the surface.
Clean all equipment with Mineral Turps.
1 Ltr, 4 Ltrs, 10 Ltrs.
Transparent semi-gloss finish.
Ensure good ventilation during application and drying. The product is highly flammable. Keep out of the reach of children.
View the Material Safety Data Sheet (MSDS) for full information regarding Health and Safety, First Aid, and Paint Disposal Procedures.