Wood Primer

Australis Wood Primer

Product Code: 82-100

Product Description

Australis Wood Primer is a high quality solvent based primer for interior and exterior use.

Areas of Use

  • Interior and Exterior surfaces
  • Suitable for timber and timber based materials

Method of application

  • May be applied with a brush, roller, airless or conventional spray
  • Stir well before use by stirring with a broad flat paddle in a scooping motion
  • Do not apply if temperature is below 10C or likely to fall below 10C during drying
  • Do not apply if rain is expected or in hot, dry conditions


Approximately 16 square metres per litre. This will vary depending on the application technique, the surface profile and absorption qualities of the surface.


Leave to dry overnight before re-coating. In damp, cool or humid conditions, drying may be extended.

Clean Up

Clean all equipment with Mineral Turpentine.

Surface Preparation

Remove all soft, powdered, blistered, loose or flaking paint. Remove all traces of grease, dirt, oil or smoke using a suitable detergent. Wash with clean water and allow to dry. Apply the primer to bare timber and repair any cracks or surface defects with a good quality filler. Sand smooth and dust off.

Note: Mould or fungal infected surfaces must be treated to eliminate the possibility of recurrence.


1 Ltr, 4 Ltrs, 10 Ltrs.


White. Tints available on request.


Ensure good ventilation during application and drying. The product is highly flammable. Keep out of the reach of children.

View the Material Safety Data Sheet (MSDS) for full information regarding Health and Safety, First Aid, and Paint Disposal Procedures.