Australis Polyurethane Gloss
Product Code: 90-900
Polyurethane Clear Gloss is a fast drying, hard wearing (with F90-902 Hardwear Additive) water and alcohol resistant varnish.
Areas of Use
Designed for direct application to timber, plywood and panelling to enhance their natural elegance.
Ensure the timber surface is dry and free from oil, grease, dirt and wax. Rub down with sandpaper to a smooth surface and dust off.
Stir well using a broad flat panel in a scooping motion. Ensure there is no settlement at the bottom of the can prior to use as this may result in varied gloss levels. May be applied by brush, roller, airless or conventional spray.
Dry to touch in 2 hours at normal temperatures. Recoatable after overnight drying. In cold or humid conditions, drying will be extended.
Approximately 16 square metres per litre. This will vary depending on the application technique and the surface absorption of the particular timber.
Available in Clear (Tintable with shop tinters to a stained varnish).
1 Ltr, 4 Ltrs, 10 Ltrs.
Ensure good ventilation during application and drying. The product is highly flammable Keep away from flames. Keep out of the reach of children.
View the Material Safety Data Sheet (MSDS) for information regarding Health and Safety, First Aid, and Paint Disposal Procedures.